Error in PC
Meaning of the BEEP Sounds in PC!
ERROR CODES IN A PC One Beep
:Quote:DRAM refresh failureThis may be due to - Bad memory chips- A bad DMA Chip- Bad memory addressing chips on the motherboard
Two Beeps
:Quote:Parity error or Parity Circuit failureYour memory may not be seated properly on the mother board.Unplug and plug it properly
Three Beeps
:Quote:Bad memory or bad mother board
Four beeps
:Quote:Timer failure in the RAM.
Five Beeps
:Quote:CPU chip may be dead
Six Beeps
:Quote:Keyboard controller may have failed
Seven beeps
:Quote:CPU is dead. Retry the connections and test.Replace the whole motherboard.
Eight Beeps
:Quote:Video card is missing or Bad.
Nine Beeps
:Quoteamaged ROM BIOS. BIOS chip has to be replaced if it persists.
Ten Beeps
:Quote:CMOS shutdown. Replace CMOS memory and associated chips.
Eleven Beeps
:Quote:Cache memory test has failed.To enable cache memory try CTRL+ALT+SHIFT++.
One long Beep and Three short Beeps
:Quote:Memory failure
One long Beep and Eight short Beeps
:Quote:Video card failure. Try to install video card in another slot.
No Beeps
:Quote:Check Power supplyCheck mother board connectionsRemove all cards except video card and check for system power upInsert all cards one at a time and check their operation.If system hangs on the installation of a particular card, then it is the cause for the problem and replace it with another of that type and check.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment